1. Please make a networkin topology like this bottom. Don’t forget, Give clock rate on the interface s0/0/0 on the router1.

     

     

  2. The following is configuration for router 1.

    Router#ena

    Router#configure t

    Router(config)#ipv6 unicast-routing

    Router(config)#interface fastEthernet 0/0

    Router(config-if)#ipv6 enable

    Router(config-if)#ipv6 ADdress 2001:470::1/64

    Router(config-if)#ipv6 address fe80::1 link-local

    Router(config-if)#no shutdown

     

    Router#show ipv6 interface brief

    FastEthernet0/0 [up/up]

    FE80::1

    2001:470::1

    FastEthernet0/1 [administratively down/down]

    Serial0/0/0 [up/up]

    Serial0/0/1 [administratively down/down]

    Vlan1 [administratively down/down]

     

    Router#configure t

    Enter configuration commands, one per line. End with CNTL/Z.

    Router(config)#ipv6

    Router(config)#inter

    Router(config)#interface s

    Router(config)#interface serial 0/0/0

    Router(config-if)#ipv6 enable

    Router(config-if)#ipv6 address 2001:471::1/64

    Router(config-if)#no shutdown

     

    Router#configure t

     

    Router(config)#ipv6 router rip ciscorip

    Router(config-rtr)#exit

     

    Router(config)#int fa0/0

    Router(config-if)#ipv6 rip ciscorip enable

    Router(config-if)#exit

     

    Router(config)#int s0/0/0

    Router(config-if)#ipv6 rip ciscorip enable

    Router(config-if)#exit

     

    Router#show ipv6 route

    IPv6 Routing Table – 6 entries

    Codes: C – Connected, L – Local, S – Static, R – RIP, B – BGP

    U – Per-user Static route, M – MIPv6

    I1 – ISIS L1, I2 – ISIS L2, IA – ISIS interarea, IS – ISIS summary

    O – OSPF intra, OI – OSPF inter, OE1 – OSPF ext 1, OE2 – OSPF ext 2

    ON1 – OSPF NSSA ext 1, ON2 – OSPF NSSA ext 2

    D – EIGRP, EX – EIGRP external

    C 2001:470::/64 [0/0]

    via ::, FastEthernet0/0

    L 2001:470::1/128 [0/0]

    via ::, FastEthernet0/0

    C 2001:471::/64 [0/0]

    via ::, Serial0/0/0

    L 2001:471::1/128 [0/0]

    via ::, Serial0/0/0

    R 2001:472::/64 [120/2]

    via FE80::2E0:F7FF:FE0D:9D0A, Serial0/0/0

    L FF00::/8 [0/0]

    via ::, Null0

  3. The following is configuration for router 2.

    Router#ena

    Router#configure t

    Router(config)#ipv

    Router(config)#ipv6 unicast-routing

    Router(config)#interface fastEthernet 0/0

    Router(config-if)#ipv6 enable

    Router(config-if)#ipv6 address 2001:472::1/64

    Router(config-if)#ipv6 address fe80::1 link-local

    Router(config-if)#no shutdown

     

    %SYS-5-CONFIG_I: Configured from console by console

    Router#show ipv6 interface brief

    FastEthernet0/0 [up/up]

    FE80::1

    2001:472::1

    FastEthernet0/1 [administratively down/down]

    Serial0/0/0 [up/up]

    Serial0/0/1 [administratively down/down]

    Vlan1 [administratively down/down]

     

     

    Router(config)#interface serial 0/0/0

    Router(config-if)#ipv6 enable

    Router(config-if)#ipv6 address 2001:471::2/64

     

    Router#sh ipv6 interface brief

    FastEthernet0/0 [up/up]

    FE80::1

    2001:472::1

    FastEthernet0/1 [administratively down/down]

    Serial0/0/0 [up/up]

    FE80::2E0:F7FF:FE0D:9D0A

    2001:471::2

    Serial0/0/1 [administratively down/down]

    Vlan1 [administratively down/down]

     

    Router#configure t

     

    Router(config)#ipv6 router rip ciscorip

    Router(config-rtr)#exit

     

    Router(config)#int fa0/0

    Router(config-if)#ipv6 rip ciscorip enable

    Router(config-if)#exit

     

    Router(config)#int s0/0/0

    Router(config-if)#ipv6 rip ciscorip enable

    Router(config-if)#exit

     

    Router#sho ipv6 route

    IPv6 Routing Table – 6 entries

    Codes: C – Connected, L – Local, S – Static, R – RIP, B – BGP

    U – Per-user Static route, M – MIPv6

    I1 – ISIS L1, I2 – ISIS L2, IA – ISIS interarea, IS – ISIS summary

    O – OSPF intra, OI – OSPF inter, OE1 – OSPF ext 1, OE2 – OSPF ext 2

    ON1 – OSPF NSSA ext 1, ON2 – OSPF NSSA ext 2

    D – EIGRP, EX – EIGRP external

    R 2001:470::/64 [120/2]

    via FE80::260:5CFF:FEAD:2A01, Serial0/0/0

    C 2001:471::/64 [0/0]

    via ::, Serial0/0/0

    L 2001:471::2/128 [0/0]

    via ::, Serial0/0/0

    C 2001:472::/64 [0/0]

    via ::, FastEthernet0/0

    L 2001:472::1/128 [0/0]

    via ::, FastEthernet0/0

    L FF00::/8 [0/0]

    via ::, Null0

     

     

     

  4. Setting ip address on the PC3.

  5. Setting ip address on the PC2.

     

  6. Setting ip gateway on the PC3.

     

  7. Setting ip gateway on the PC2.

 

  1. Check your ip configuration on the pc2 and pc3.

     

     

  2. Check connectivity whit ping. PC 2 to PC 3 and vice versa.